核磁共振法研究CH2=CHSi（OET）3的水化反应

高强水泥的生产近年来巳成为许多国家发展水泥生产的一个主要方向。在水泥中加入有机单体可以改善混凝土的质量,如加重量比为3％的有机硅烷偶联剂乙烯基三乙氧基硅烷CH_2=CHSi(OEt)_3(简称VTES)于水泥中,即可在较大程度上增加水泥石的强度。     

Structure of Palladium( Ⅱ ) Complex with 2-Hydroxy-propane 1, 3-diamine-N,N,N'''' N'''',-tetraacetic Acid

The reaction of PdCl2 in water with 2-hydroxypropane-1, 3-diaminetetraacetic acid (HPDTA) gave the complex Pd (C11H16N2O9)·1. 5H2O, which was characterized by elemental analysis, IR, NMR and single-crystal X-ray diffraction. The spectroscopic and X-ray diffraction data show that Pd ( Ⅱ ) is coordinated by two nitrogen atoms and two car-boxylic oxygen atoms. The complex crystallizes in monoclinic space group Pc with a = 1. 1240(2), b=1. 1183(2), c=1. 2597(3) nm, β=96. 33(2)°V=1. 5737(6) nm3, Z = 4, R= 0.038. The structure contains two crystallographically independent molecules which have slightly different orientations and are connected by hydrogen bonds.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Nitrile-functionalized pyridinium ionic liquids: synthesis, characterization, and their application in carbon-carbon coupling reactions

A series of relatively low-cost ionic liquids, based on the N-butyronitrile pyridinium cation [C(3)CNpy](+), designed to improve catalyst retention, have been prepared and evaluated in Suzuki and Stille coupling reactions. Depending on the nature of the anion, these salts react with palladium chloride to form [C(3)CNpy](2)[PdCl(4)] when the anion is Cl(-) and complexes of the formula [PdCl(2)(C(3)CNpy)(2)][anion](2) when the anion is PF(6)(-), BF(4)(-), or N(SO(2)CF(3))(2)(-). The solid-state structures of [C(3)CNpy]Cl and [C(3)CNpy](2)[PdCl(4)] have been established by single-crystal X-ray diffraction. The catalytic activity of these palladium complexes following immobilization in both N-butylpyridinium and nitrile-functionalized ionic liquids has been evaluated in Suzuki and Stille coupling reactions. All of the palladium complexes show good catalytic activity, but recycling and reuse is considerably superior in the nitrile-functionalized ionic liquid. Inductive coupled plasma spectroscopy reveals that the presence of the coordinating nitrile moiety in the ionic liquid leads to a significant decrease in palladium leaching relative to simple N-alkylpyridinium ionic liquids. Palladium nanoparticles have been identified as the active catalyst in the Stille reaction and were characterized using transmission electron microscopy.     

Pt微粒修饰纳米纤维聚苯胺电极对甲醇氧化电催化

以脉冲电流法制备的纳米纤维状聚苯胺(PANI)为Pt催化剂载体，用它制备了甲醇阳极氧化的催化电极Pt/（nano-fibular PANI）.研究结果表明, Pt/（nano-fibular PANI）电极对甲醇氧化具有很好的电催化活性,并有协同催化作用.在相同的Pt载量条件下， Pt/（nano-fibular PANI）电极比Pt微粒修饰的颗粒状聚苯胺电极Pt/(granular PANI)具有更好的电催化活性.此外， Pt的电沉积修饰方法同样影响Pt/（nano-fibular PANI）电极对甲醇氧化的催化活性.脉冲电流法沉积Pt形成的复合电极较循环伏安法电沉积得到的Pt复合电极具有更优异的催化活性.     

活性聚苯乙烯膜诱导碳酸钙异相成核结晶

0引言生物矿物材料(如骨、牙齿、贝壳等)的优异性能[1]使得无机材料的仿生合成(又称有机模板合成)成为近年来研究的热点之一[2]。该合成技术的优点是,通过有机物分子与无机离子的相互作用,能够在温和的条件下合成出具有多级结构、特殊形貌和优异性能的有机/无机复合材料。CaCO3     

The influence of cetyltrimethyl ammonium bromide on electrochemical properties of thyroxine reduction at carbon nanotubes modified electrode

The effect of cetyltrimethyl ammonium bromide (CTAB) on the electrochemical behaviors of thyroxine at a glassy carbon electrode (GCE) modified with single-walled carbon nanotubes (SWNTs) was investigated. At the SWNTs film-coated GCE, a well-defined oxidation peak of thyroxine at 0.78 V was obtained, but the reduction peak of thyroxine was indiscernible. When trace CTAB was added to the working solution, the reduction current could be greatly enhanced and the oxidation current remained stable. The reaction mechanisms for the reduction of thyroxine were explored by chronocoulometry. Thyroxine might form particular ion complex with CTAB via the interaction between iodine atoms on thyroxine and bromide ions in CTAB, which made the concentration of thyroxine at the surface of the modified electrode increased and the electron transfer rate enhanced. The proper mechanisms for the enhanced reduction of thyroxine in the present of CTAB were explored by several electrochemical techniques including cycle voltammetry linear sweep voltammetry and others. It was concluded that the special interactions between the thyroxine CTAB and SWNTs resulted in the increase of the reduction peak current. All results indicated that two iodine atoms on the thyroxine and four electrons were involved the reduction process which was irreversible and two iodine ions produced. In this system, the sensitive reduction peak of thyroxine at 0.3 V was employed to determine thyroxine and a low detection limit of 2x10(-8) mol/L was obtained for 2 min accumulation at 0.9 V. The SWNTs coated GCE had good stability and reproducibility.     

火焰原子吸收法测定化妆品中的铬

采用火焰原子吸收分光光度法测定了兰州市的一些市售化妆品中铬的含量。结果表明,方法检测限(3σ)为0.003 mg/L,回收率在94%~105%之间,相对标准差小于1.3%,方法简便快速;市售多数化妆品中的铬含量超过国家标准,须引起人们的注意。     

色谱法在三氯半乳蔗糖合成中的应用

采用薄层色谱和柱色谱法，选择优化展开体系，有效地分析了三氯半乳蔗糖中间体2，3，6，3′，4′-五氧乙酰蔗糖混合物，并证实该混合物中杂质为三苯甲醇，为三氯半乳蔗糖的合成研究取得了重要发现。